Methods of Ventilation in Tunnels - Civil Engineering

Wednesday, 4 September 2019

Methods of Ventilation in Tunnels

Methods of Ventilation in Tunnels

Following methods are implemented for ventilation in tunnels:
  • Natural Method
  • Mechanical Method
Methods of Ventilation in Tunnels
Methods of Ventilation in Tunnels

1. Natural Ventilation

When a tunnel receives fresh air and automatically removes the dust without the use of mechanical appliances, this sort of ventilation is called natural ventilation. This type of ventilation can be improved by providing shaft in regular interval along the length of the tunnel during its construction.

2. Mechanical Ventilation

When the ventilation in tunnels done by the help of mechanical devices is known as mechanical ventilation. Mechanical ventilation is done by any one of the following methods:

(i) Blowing

This type of ventilation method is suitable for short length tunnel. In this system of ventilation, Fresh air is blown by blower installed in the input shaft. Blowers provide a uniform distribution of fresh air at the workplace, and the vitiated air is pushed out through the portals.

(ii) Exhausting

In this method of ventilation, vitiated air is sucked from the tunnel by using exhaust fans and fresh air is drawn into the tunnel through inlet shaft. This method rapidly removes dust and foul air from the working face of the tunnel but does not provide proper ventilation.

Combination of Blowing and exhausting

A combination of blower and exhaust fan is the most reliable ventilation system. This combined system utilizes the advantages of both blowing and exhausting. Immediately after blasting, the exhaust system is operated for 10 to 25 min to drop smoke and dust and then fan are reversed for blowing fresh air.
Read Also:

No comments:

Post a Comment